S7-PLCSIM Advanced V3.0新功能
共享对象和同步 DLL 支持 ODK
可通过 ODK 对 S7-1518MFP 进行仿真 - 无需在 STEP 7 程序代码中进行任何更改。需要进行硬件配置来仿真 S7-1518MFP 的功能。
PLCSIM Advanced 现在支持版本为 V14 到 V16 的 TIA Portal 项目以及固件版本为 V1.8 – V2.8 的 CPU。
PLCSIM Advanced API 的改进
已对 API 进行了改进，可浏览网络中的运行系统，从而进一步改进了在复杂场景中的应用。
API 现在还支持删除虚拟存储卡（本地和远程），在自动测试等场景下释放内存。
对 OB 溢出情况下的诊断条目进行了改进。
What is S7-PLCSIM Advanced?
Using PLCSIM Advanced, you can simulate your CPU programs on a virtual controller. You do not need any real controllers for this. You can configure your CPU with STEP 7 in the
TIA Portal, program your application logic and then load the hardware configuration and the program into the virtual controller. From there you can run your program logic, observe the effects of simulated inputs and outputs and adapt your programs.In addition to communicating via Softbus, PLCSIM Advanced provides a full Ethernet
connection and can thus also communicate distributed.PLCSIM Advanced enables interaction with native C++/C# programs or simulation software over the user interface (API).
The use of PLCSIM Advanced offers numerous advantages:
● Improve quality of automation projects by early error detection
● Avoid costs for hardware in simulation environments
● Reduced response times
● Reduce risk for commissioning
● Earlier training of operator is possible
● Increase production efficiency by optimizing program components
● Increase efficiency during replacement of machine components
● Increase efficiency during expansion of existing plants
S7-PLCSIM Advanced V3.0下载链接
 微信搜索或扫码关注学自动化 公众号 回复 000521 获取资源下载链接 |
